High-Strength Carbide™ Oscillating Tool Blade (3 Pack Bundle)

WonderBlade High Strength Carbide 3 pack bundle p1
WonderBlade Carbide Oscillating Tool Blade leftside
WonderBlade Oscillating Tool Blades Carbide benefits (1)
WonderBlade Carbide Oscillating Tool Blade front
WonderBlade Oscillating Multi Tool Blade cutting wood, fiber cement, concrete screws
WonderBlade High Strength Carbide 3 pack bundle p2
WonderBlade Oscillating Multi Tool Blade Benefits
WonderBlade Oscillating Tool Blades Universal Fit
WonderBlade Universal Fitting on oscillating blades example
WonderBlade Carbide Oscillating Tool Blade rightcorner
WonderBlade Carbide Oscillating Tool front teeth

High-Strength Carbide™ Oscillating Tool Blade (3 Pack Bundle)

(111 customer reviews)

Need an oscillating tool blade that cuts through wood and nails effectively without wearing out? It’s not uncommon to have an oscillating tool blade that wears out after just 1 cut! This blade is a Carbide Oscillating Tool Blade, and the High-Strength Carbide at the tip of the blade is arguably one of the strongest in the industry.

No need to keep going back and forth to the local hardware store for oscillating blades when you can just have ONE that works consistently! This High-Strength Carbide blade is built to last many cuts through wood, nails, thin metal, plastic, and siding! Watch a video of the toughness of this blade here!

This blade is backed by our WonderBlade™ Guarantee which covers defects and breakages. Please note this oscillating tool blade is not made for cutting through concrete.

Get 3 of these blades AND Impact-Resistant Safety Glasses (ANSI Z87.1 Rated) all for a great price with this Special Limited Time Offer!

View a Testimonial on this Exact Blade from a Professional Handyman here.

Original price was: $194.97.Current price is: $109.99.

Related products

High-Strength Carbide™ Oscillating Tool Blade (3 Pack Bundle)

SKU WB1002 Category

Description

Need an oscillating tool blade that cuts through wood and nails effectively without wearing out? It’s not uncommon to have an oscillating tool blade that wears out after just 1 cut! This blade is a Carbide Oscillating Tool Blade, and the High-Strength Carbide at the tip of the blade is arguably one of the strongest in the industry.

No need to keep going back and forth to the local hardware store for oscillating blades when you can just have ONE that works consistently! This High-Strength Carbide blade is built to last many cuts through wood, nails, thin metal, plastic, and siding! Watch a video of the toughness of this blade here!

This blade is backed by our WonderBlade™ Guarantee which covers defects and breakages. Please note this oscillating tool blade is not made for cutting through concrete.

Get 3 of these blades AND Impact-Resistant Safety Glasses (ANSI Z87.1 Rated) all for a great price with this Special Limited Time Offer!

View a Testimonial on this Exact Blade from a Professional Handyman here.

111 reviews for High-Strength Carbide™ Oscillating Tool Blade (3 Pack Bundle)

  1. la392k –

    Its a good blade and it cuts well, I have used others similar to this from Lowes and the Wonderblade performs better, I just wish they come down in price some time in the future.

  2. Edward Fuentes –

    very good for cutting nails easy

  3. booker.payne –

    booker.payne

  4. scott.knight4 –

    scott.knight4

  5. Robert Rojas –

    The blade cuts through wood with nails so fast and it lasts a lot longer than other blades I’ve used in the past like Dewalt, Milwaukee, and Dremel. It’s hard to say if its better than Diablo blades, but I wouldn’t say Wonderblade is worse either. In the past, I’ve had to go through about 10 blades to complete a similar project, but with this carbide blade, I didn’t have to change it out once. It’s a game-changer and I highly recommend it to anyone in need of a reliable and efficient cutting tool.

  6. Rob Bird –

    BEST BLADE I HAVE EVER USED, this thing cut better than all those 10x life titanium blades that I find at the store, this thing just doesn’t give out and I have used it dozens of times against pipes, sheetrock, and nails!!!!

  7. max.grueneweald –

    max.grueneweald

  8. will.montgomery –

    will.montgomery

  9. Will –

    great blade overall for getting into very tight corners or simple repairs, but if I was using this blade for cutting wood and hardie boards, I would prefer a standing regular saw.

  10. James Carter –

    What a great blade, it came in neatly packaged about two days after ordering and I used it to cut a section of fiber cement to install an electrical outlet and it worked beautifully. This same project would have destroyed 2 or 3 other blades I had in my multi tool kit easily and this high strength carbide blade is still looking good!

  11. Carol Watts –

    I love it! I didn’t have to shift through my local hardware store to find similar blades, as soon as I saw the advertisement and the video, I knew this was going to be a good blade. Great buy and highly recommend!

  12. james.atkinson –

    Good job

  13. Mike.Morales1995 –

    Mike.Morales1995

  14. Tyler T. –

    This blade has been a lifesaver for me. It cuts through everything easily and it’s still going strong after multiple uses. Highly recommend it.

  15. Jimmy B. –

    Jimmy B.

  16. jose.fernandez –

    jose.fernandez

  17. jay.berthiaume –

    I always read reviews before making tool purchases and these blades were highly recommended and the ads Ive seen looked very promising, so I decided to give them a try. I’m glad I did and they’ve been rock solid and have exceeded my expectations. I’ve used them to cut through wood, sheet metal, screws, and piping and while it was slow on cutting bolts, it was still good for softer materials. These have become my go-to blades and I’m extremely satisfied with my purchase, I’m definitely going to give some of these carbide high strength blades to my coworkers!!

  18. Jason Allen –

    I was skeptical about the higher price of these carbide oscillating multi tool blades, but they’ve exceeded my expectations with their performance. They cut through any material with ease and they last so much longer than Dremel or Milwalkee. Great value for the price, you really get what you pay for.

  19. joseph.mendoza3 –

    I’m so glad I found these carbide oscillating multi tool blades, they’re the first ones I’ve used that can cut through more than one nail without dulling. I’m so impressed with their quality that I’m buying more for myself and giving them to my friends. They make cut 1 inch sheetrock screws and roofing damn well. I’ve used these multiple times and it’s still going strong. I highly recommend these blades to anyone in need of a reliable and efficient cutting tool. Great job, Wonderblade!

  20. Rylie Mackenzie –

    When I first saw the ad, I was contemplating about spending $70, but I spend the money and decided to give it a try and spend a little extra on these carbide oscillating multi tool blades, but they’ve more than paid for themselves with their effectiveness. I’ve used the same exact blade for multiple home projects and besides some of the paint being scratched off, it’s still in shape and all the teeth are still in place.

  21. alex.ruiz –

    alex.ruiz

  22. michael.ruiz –

    Great general blade for just about everything overall!

  23. richard.wright –

    richard.wright

  24. emilio.rosas –

    emilio.rosas

  25. philip.friedmannn –

    philip.friedmannn

  26. Anthony –

    Anthony

  27. Steven Weiner –

    Great for drywall and small sections of 2×4👍

  28. Susan Rivera –

    Used it once to remove a shelf screwed into the wall,so far very good

  29. Mike Deyoung –

    Used a few blades for demolishing a shed and it works better than all the other brands I bought at Home Depot and Northern Tool.

  30. gustavo.sears –

    best multi tool blade for cutting screws

  31. jason.kempkes –

    I’m extremely impressed with the performance of these carbide oscillating multi tool blades and they last so much longer than the bi-metal blades I’ve used in the past. I’ve gone through at least 20 bi-metal blades every week and I’ll never go back. Highly recommend them!

  32. antonio.rosas –

    very good 👍👍

  33. Michael Stevenson –

    Michael Stevenson

  34. jeremy.hodgetts –

    I’ve been using this blade for a few months now and it’s been fantastic. It cuts through everything easily and it’s held up well over multiple uses.

  35. anthonyb –

    anthonyb

  36. anthonyb –

    I was a bit skeptical about the higher price of these carbide oscillating multi tool blades, but they’ve proven to be worth every penny with their performance. They cut through any material with ease and they last so much longer than the bi-metal blades I’ve used in the past. Great value for the price!

  37. devin.pittmannn –

    devin.pittmannn

  38. Tony.Juarez –

    I’ve been using this high strength carbide multi blade for a few months now and it’s been fantastic. It cuts through everything easily and it’s held up well over multiple uses. I’d definitely recommend it.

  39. raul.mendoza –

    raul.mendoza

  40. robinoos –

    These carbide oscillating multi tool blades are a game-changer, they cut through everything with ease and they last so much longer than many other brands of oscillating blades I’ve used in the past. Great job, Wonderblade!

  41. Michael Williams –

    Michael Williams

  42. larry.dock –

    larry.dock

  43. joseph.crowell5 –

    joseph.crowell5

  44. kevin.strange –

    kevin.strange

  45. john o’conner –

    john o’conner

  46. Lennard H. –

    I was a little hesitant to spend the extra money on these carbide oscillating multi tool blades, but they’ve more than justified their price with their efficiency and durability. I’ve used the same one for multiple projects and it’s still going strong, while the bi-metal blades I’ve used in the past barely last for a single project. Highly recommend them!

  47. bryanttjackson –

    bryanttjackson

  48. ricky.belanger –

    ricky.belanger

  49. bobby.hazlett –

    bobby.hazlett

  50. ralph.werfel –

    These high-strength carbide multi tool blades are amazing they cut through everything with ease and they last so much longer than any other multi tool blades I’ve used in the past and I’ve used A LOT and have been in the remodeling business for over 20 years.

  51. robert.johnson89 –

    robert.johnson89

  52. albert.scott –

    albert.scott

  53. albert.scott –

    Good blade, will buy again.

  54. michellerobbert –

    michellerobbert

  55. jose.garcia2 –

    jose.garcia2

  56. Tim Himansen –

    Tim Himansen

  57. jose.guerra –

    I was a little hesitant to spend a little extra on these carbide oscillating multi tool blades, but they’ve more than paid for themselves with their efficiency and durability. I’ve used the same one for demoing out a room and building a few extra rooms for my client and it’s still going strong, better than using 5 or 10 blades!

  58. jackjack777 –

    I tried one of these through concrete and I’ve seen though my testing that the carbide high strength blade does not go through concrete, but it remained intact. They go through nails and screws with ease and goes through sheetrock very very easily.

  59. brandon.gar773 –

    brandon.gar773

  60. chris.miller4 –

    The carbide oscillating blade is a game-changer for my DIY projects. It cuts through door trim, sheetrock, and nails with ease, and lasts much longer than traditional blades!

  61. Giovanny Siciliano –

    I can’t believe how efficient and durable these carbide oscillating multi tool blades are Ive used the same one for multiple projects and it’s still going strong.

  62. eddie.linkeroff –

    eddie.linkeroff

  63. oliviaaaaaaa –

    oliviaaaaaaa

  64. amanda.rice –

    amanda.rice

  65. jack.magee –

    I recently purchased this carbide oscillating blade for my multi-tool and have been extremely happy with how it cuts. It cuts through wood and metal like butter and the durability is outstanding.

  66. Felipe Haga –

    Felipe Haga

  67. steven.montenez –

    As an electrician, I’m extremely satisfied with these carbide oscillating multi tool blades, they’re efficient, durable, and they make cutting work through walls and studs and retrofitting of any material easy. I’ve used the same one for multiple projects and it’s still going strong, whereas other metal oscillating tool blades I’ve used in the past barely last for a single project. Highly recommend them!

  68. justintimtim –

    justintimtim

  69. Kimberly C. –

    Kimberly C.

  70. scott.knight5 –

    scott.knight5

  71. Jim Hendricks –

    Jim Hendricks

  72. brian.bunton –

    brian.bunton

  73. eric.delgado –

    eric.delgado

  74. Kendrick Coleman –

    I have been using this carbide oscillating blade for several months now and have been extremely impressed with its ability to last many cuts.

  75. jasonkem –

    jasonkem

  76. patrick.wechsler –

    patrick.wechsler

  77. max.eberhardtd –

    max.eberhardtd

  78. happycamperpeter –

    I’ve been using this blade for months and it’s still as sharp as day one.

  79. Martin Bilik –

    This blade is top-notch. It cuts through everything with ease and it’s still going strong after multiple uses!!!! 👏

  80. alex.fink –

    alex.fink

  81. luis.castro.santos –

    Blade is very good

  82. patrick.johnson –

    patrick.johnson

  83. frank.zeigler –

    I’m really impressed with this carbide blade. It cuts through everything with ease and all teeth are still strong after multiple uses. Highly recommend!

  84. erick.fernandez7 –

    When I saw the video of it cutting through the nails easily, I told myself that I needed it badly, I only got a few since they didn’t have it in stock for a week, now that I have some of the carbide high strength oscillating blades, I am super impressed with them!! It cuts through most materials and helps with making artifacts and woodwork, will buy more when I can!!

  85. Steven Koehler –

    Steven Koehler

  86. leonard.starr –

    leonard.starr

  87. leonard.starr –

    I was hesitant to spend the extra money on this carbide blade, but it has been worth every penny.

  88. paul.poljak –

    I have been using this carbide oscillating blade for a few months now and it has exceeded my expectations. It cuts through wood and cut through metal on a door footing.

  89. dylan.hutchinson2 –

    dylan.hutchinson2

  90. josegarcor –

    really good overall

  91. Dillan Hayward –

    The blade I got from Wonderblade works just like in their videos and I’m very impressed!

  92. antoniowilmanruiz –

    antoniowilmanruiz

  93. logan.willis81 –

    this is the same as their main oscillating blade, just a better deal! I got these blades a few weeks ago for remodeling my basement and works good for its intended use.

  94. lewisgordald3 –

    Decent blade for the multi tool, works best for cutting hard metal and tough nails.

  95. oscar.cruz3 –

    oscar.cruz3

  96. Robert Copeland –

    I have had these blades for about 4-5 months, I don’t use them often, however when I need them for cutting out pipes I can’t get into ordinarily with my other tools, it’s always done the job, I do advise others to not think this blade is invincible, it is great and better than any other ones I’ve ever used, there is only so much pressure you can apply on the multitool, so I advise others to still take it easy on the blade just like any other tool that’s worth keeping for a long time.

  97. jesus.morales9 –

    Very good blade for the oscillating tool, I have tried Diablo many times over the years, but I have noticed that those wear out faster than the Wonder Blade. This blade is good for not just metal, but with fiber cement board which to my surprise I did not know, no other blade stood the test of time against it. So far I love the blade!

  98. Bill Willington –

    Amazing blades, I ordered a few of these and they still hold up well, Ive used these to cut the bottom of door frames, screws and what not and they are very reliable!

  99. harsonhernandezz3 –

    My only concern with this blade was that it did not fit on my Bosch starlock tool, but it did with my Ryobi multi tool, nonetheless it works flawlessly against thick 5/16inch bolts and so on. Excellent job Wonderblade!

  100. hanser.benjamin –

    I bought a few of these oscillating blades a few months ago for myself and coworkers and they are surprisingly in good condition, we use them in our facility for cutting metal pieces, wood, and aluminum. Great job Wonder Blade!

  101. Kenswickrick –

    Kenswickrick

  102. Xavier Vasquez –

    Really wish they had these in stores, they don’t have anything like this and well yes there are other offbrands, I don’t like the others brands customer service or quality, I had a small delay one time and that got resolved quickly by WonderBlade, everything this company has is of great quality and I gets delivered to me fast. Thank you very much for your blades and help!!

  103. utilroofguy345 –

    Good blades, wish they come down in price just a little.

  104. tony.barrera –

    This blade is a really good blade, I love how they are attenative to details and taking care of their customers, good value and good company.

  105. james.serrano –

    WOW! I thought it would be too good to be true when seeing the videos online, but after getting my hands on these multi tool blades, I was astonished how well they cut. They are thick and good quality and just amazing overall!

  106. kenneth.rice –

    kenneth.rice

  107. CALLUM JOHNSTON –

    Had a few of these shipped to me in The UK, kind gentlemen and support, fast to arrive, and the Multi-Tool Blades are superior. PRICE MATCHES THE QUALITY. EXCELLENT, JUST LIKE IN THE VIDEOS. THANK YOU!

  108. Denny Mela –

    Unbelievable blade! In the process of cutting more than 12 metal closet rods for a recent makeover project, I used one of these blades to see if it was as good as advertised. I was blown away at the condition of the blade after all of these cuts in the metal rod that was quite heavy oval steel metal chromed rod. The blade hardly got hot and cut the rod material like it was butter. I’ve done this with other blades and have gone through several blades in the process. You definitely get what you pay for with these blades!

  109. Fernando Gonzales –

    Amazing blades! I’ve cut throught so many stuff with these blades! I got the 3 pack with safety glasses a while back and I have them everywhere I go! From working on plumbing work to minor remodeling this all comes in handy when I need it and they have really great support, all well worth the price 😁😁

  110. CALLUM JOHNSTON –

    Hard to get a hold of the 3 blade pack! Still great blades!

  111. Marco Gonzales –

Add a review

Your email address will not be published. Required fields are marked *

Search
WonderBlade Logo blue lighting

Get a Complimentary DEWALT 20V MAX XR

Cordless Oscillating Multi-Tool when you Get

TWO Blade Bundles

*Note: You may also email us at sales@wonderblade.com for the latest specials.