Need an oscillating tool blade that cuts through wood and nails effectively without wearing out? It’s not uncommon to have an oscillating tool blade that wears out after just 1-2 cuts! This blade is a High-Strength Carbide™ Oscillating Tool Blade, and the High-Strength Carbide™ teeth at the tip of the blade is arguably one of the strongest in the industry as it consistently cuts wood, nails, and screws like no other!
No need to keep going back and forth to the local hardware store for oscillating blades when you can just have ONE that works consistently! This High-Strength Carbide™ blade is built to last many cuts through wood, nails, thin metal, plastic, and siding! Watch a video of the toughness of this blade here on our homepage!
This blade is backed by our WonderBlade™ Guarantee which covers defects and breakages. Please note this oscillating tool blade is not made for cutting through concrete.
View a Testimonial on this Exact Blade from a Professional Handyman here.
$64.99
Need an oscillating tool blade that cuts through wood and nails effectively without wearing out? It’s not uncommon to have an oscillating tool blade that wears out after just 1-2 cuts! This blade is a High-Strength Carbide™ Oscillating Tool Blade, and the High-Strength Carbide™ teeth at the tip of the blade is arguably one of the strongest in the industry as it consistently cuts wood, nails, and screws like no other!
No need to keep going back and forth to the local hardware store for oscillating blades when you can just have ONE that works consistently! This High-Strength Carbide™ blade is built to last many cuts through wood, nails, thin metal, plastic, and siding! Watch a video of the toughness of this blade here on our homepage!
This blade is backed by our WonderBlade™ Guarantee which covers defects and breakages. Please note this oscillating tool blade is not made for cutting through concrete.
View a Testimonial on this Exact Blade from a Professional Handyman here.
WonderBlade™ is all about saving you time and money. No need to waste time on blades that don't cut. We are your solution for quality and effective blades that save you time and money on the jobsite or at the house.
Anthony Hardy –
christopher.ramirez –
I was given this blade by a contractor friend and I have used this over and over again to cut small areas of wood and fiber cement and this blade is still intact! I am keeping this blade for as long as possible.
juan.hernandez89 –
miguel.sanchez3 –
John McCain –
john.hall –
I saw the advertisement on this carbide oscillating multi tool blade and deciding to give them a try and I’m really happy with it. Shipping was fast and the blade was packaged well and came with a small pouch. The first time I used it, I was impressed with how well it cut through sheetrock and some boards with a few nails in them. It left a clean, smooth finish and made the job so much easier than using my utility knife and making a bigger mess. I’d definitely recommend this blade!
craig.caldwell –
This carbide tip blade cuts through wood with nails like a hot knife through butter. It made quick work of a project that I was dreading to do in my home because I knew it would be so time-consuming, but the idea of using this blade with my multi tool that I barely use came into mind when I saw their ad. The blade pretty much cut through wood, siding, and screws and looked totally fine and a whole lot better than the pack of 50 blades that I got off Amazon. I’m really impressed with the quality of this blade and would definitely recommend it to others. Great job!
Terry T. –
Great blade and quality.
edward.whitehouse –
Spencer Boyd –
Great tool and addition to my tool pouch!
Ben Howard –
Best oscillating blade I know of, a bit pricey compared to Amazon, but it’s definitely worth it.
charlie.wood –
charleswln342 –
Awesome blade, saved me a lot time!
Francis Mack –
I’ve been using the same carbide oscillating multi tool blade from this company for several projects now and it’s exceeded my expectations. It’s held up incredibly well and has cut through a variety of materials, including flashing, different gauges of finish nails, brad nails, hand-drive finish nails, framing nails, and even a large quantity of crown staples and is still in pretty decent condition.
ben.zimmermann –
very very good blade!
Mark Cantis –
la392k –
Its a good blade and it cuts well, I have used others similar to this from Lowes and the Wonderblade performs better, I just wish they come down in price some time in the future.
Edward Fuentes –
very good for cutting nails easy
booker.payne –
scott.knight4 –
Robert Rojas –
The blade cuts through wood with nails so fast and it lasts a lot longer than other blades I’ve used in the past like Dewalt, Milwaukee, and Dremel. It’s hard to say if its better than Diablo blades, but I wouldn’t say Wonderblade is worse either. In the past, I’ve had to go through about 10 blades to complete a similar project, but with this carbide blade, I didn’t have to change it out once. It’s a game-changer and I highly recommend it to anyone in need of a reliable and efficient cutting tool.
Rob Bird –
BEST BLADE I HAVE EVER USED, this thing cut better than all those 10x life titanium blades that I find at the store, this thing just doesn’t give out and I have used it dozens of times against pipes, sheetrock, and nails!!!!
max.grueneweald –
will.montgomery –
Will –
great blade overall for getting into very tight corners or simple repairs, but if I was using this blade for cutting wood and hardie boards, I would prefer a standing regular saw.
James Carter –
What a great blade, it came in neatly packaged about two days after ordering and I used it to cut a section of fiber cement to install an electrical outlet and it worked beautifully. This same project would have destroyed 2 or 3 other blades I had in my multi tool kit easily and this high strength carbide blade is still looking good!
Carol Watts –
I love it! I didn’t have to shift through my local hardware store to find similar blades, as soon as I saw the advertisement and the video, I knew this was going to be a good blade. Great buy and highly recommend!
james.atkinson –
Good job
Mike.Morales1995 –
Tyler T. –
This blade has been a lifesaver for me. It cuts through everything easily and it’s still going strong after multiple uses. Highly recommend it.
Jimmy B. –
jose.fernandez –
jay.berthiaume –
I always read reviews before making tool purchases and these blades were highly recommended and the ads Ive seen looked very promising, so I decided to give them a try. I’m glad I did and they’ve been rock solid and have exceeded my expectations. I’ve used them to cut through wood, sheet metal, screws, and piping and while it was slow on cutting bolts, it was still good for softer materials. These have become my go-to blades and I’m extremely satisfied with my purchase, I’m definitely going to give some of these carbide high strength blades to my coworkers!!
Jason Allen –
I was skeptical about the higher price of these carbide oscillating multi tool blades, but they’ve exceeded my expectations with their performance. They cut through any material with ease and they last so much longer than Dremel or Milwalkee. Great value for the price, you really get what you pay for.
joseph.mendoza3 –
I’m so glad I found these carbide oscillating multi tool blades, they’re the first ones I’ve used that can cut through more than one nail without dulling. I’m so impressed with their quality that I’m buying more for myself and giving them to my friends. They make cut 1 inch sheetrock screws and roofing damn well. I’ve used these multiple times and it’s still going strong. I highly recommend these blades to anyone in need of a reliable and efficient cutting tool. Great job, Wonderblade!
Rylie Mackenzie –
When I first saw the ad, I was contemplating about spending $70, but I spend the money and decided to give it a try and spend a little extra on these carbide oscillating multi tool blades, but they’ve more than paid for themselves with their effectiveness. I’ve used the same exact blade for multiple home projects and besides some of the paint being scratched off, it’s still in shape and all the teeth are still in place.
alex.ruiz –
michael.ruiz –
Great general blade for just about everything overall!
richard.wright –
emilio.rosas –
philip.friedmannn –
Anthony –
Steven Weiner –
Great for drywall and small sections of 2×4👍
Susan Rivera –
Used it once to remove a shelf screwed into the wall,so far very good
Mike Deyoung –
Used a few blades for demolishing a shed and it works better than all the other brands I bought at Home Depot and Northern Tool.
gustavo.sears –
best multi tool blade for cutting screws
jason.kempkes –
I’m extremely impressed with the performance of these carbide oscillating multi tool blades and they last so much longer than the bi-metal blades I’ve used in the past. I’ve gone through at least 20 bi-metal blades every week and I’ll never go back. Highly recommend them!
antonio.rosas –
very good 👍👍
Michael Stevenson –
jeremy.hodgetts –
I’ve been using this blade for a few months now and it’s been fantastic. It cuts through everything easily and it’s held up well over multiple uses.
anthonyb –
I was a bit skeptical about the higher price of these carbide oscillating multi tool blades, but they’ve proven to be worth every penny with their performance. They cut through any material with ease and they last so much longer than the bi-metal blades I’ve used in the past. Great value for the price!
devin.pittmannn –
Tony.Juarez –
I’ve been using this high strength carbide multi blade for a few months now and it’s been fantastic. It cuts through everything easily and it’s held up well over multiple uses. I’d definitely recommend it.
raul.mendoza –
robinoos –
These carbide oscillating multi tool blades are a game-changer, they cut through everything with ease and they last so much longer than many other brands of oscillating blades I’ve used in the past. Great job, Wonderblade!
Michael Williams –
larry.dock –
joseph.crowell5 –
kevin.strange –
john o’conner –
Lennard H. –
I was a little hesitant to spend the extra money on these carbide oscillating multi tool blades, but they’ve more than justified their price with their efficiency and durability. I’ve used the same one for multiple projects and it’s still going strong, while the bi-metal blades I’ve used in the past barely last for a single project. Highly recommend them!
bryanttjackson –
ricky.belanger –
bobby.hazlett –
ralph.werfel –
These high-strength carbide multi tool blades are amazing they cut through everything with ease and they last so much longer than any other multi tool blades I’ve used in the past and I’ve used A LOT and have been in the remodeling business for over 20 years.
robert.johnson89 –
albert.scott –
Good blade, will buy again.
michellerobbert –
jose.garcia2 –
Tim Himansen –
jose.guerra –
I was a little hesitant to spend a little extra on these carbide oscillating multi tool blades, but they’ve more than paid for themselves with their efficiency and durability. I’ve used the same one for demoing out a room and building a few extra rooms for my client and it’s still going strong, better than using 5 or 10 blades!
jackjack777 –
I tried one of these through concrete and I’ve seen though my testing that the carbide high strength blade does not go through concrete, but it remained intact. They go through nails and screws with ease and goes through sheetrock very very easily.
brandon.gar773 –
chris.miller4 –
The carbide oscillating blade is a game-changer for my DIY projects. It cuts through door trim, sheetrock, and nails with ease, and lasts much longer than traditional blades!
Giovanny Siciliano –
I can’t believe how efficient and durable these carbide oscillating multi tool blades are Ive used the same one for multiple projects and it’s still going strong.
eddie.linkeroff –
oliviaaaaaaa –
amanda.rice –
jack.magee –
I recently purchased this carbide oscillating blade for my multi-tool and have been extremely happy with how it cuts. It cuts through wood and metal like butter and the durability is outstanding.
Felipe Haga –
steven.montenez –
As an electrician, I’m extremely satisfied with these carbide oscillating multi tool blades, they’re efficient, durable, and they make cutting work through walls and studs and retrofitting of any material easy. I’ve used the same one for multiple projects and it’s still going strong, whereas other metal oscillating tool blades I’ve used in the past barely last for a single project. Highly recommend them!
justintimtim –
Kimberly C. –
scott.knight5 –
Jim Hendricks –
brian.bunton –
eric.delgado –
Kendrick Coleman –
I have been using this carbide oscillating blade for several months now and have been extremely impressed with its ability to last many cuts.
jasonkem –
patrick.wechsler –
max.eberhardtd –
happycamperpeter –
I’ve been using this blade for months and it’s still as sharp as day one.
Martin Bilik –
This blade is top-notch. It cuts through everything with ease and it’s still going strong after multiple uses!!!! 👏
alex.fink –
luis.castro.santos –
Blade is very good
patrick.johnson –
frank.zeigler –
I’m really impressed with this carbide blade. It cuts through everything with ease and all teeth are still strong after multiple uses. Highly recommend!
erick.fernandez7 –
When I saw the video of it cutting through the nails easily, I told myself that I needed it badly, I only got a few since they didn’t have it in stock for a week, now that I have some of the carbide high strength oscillating blades, I am super impressed with them!! It cuts through most materials and helps with making artifacts and woodwork, will buy more when I can!!
Steven Koehler –
leonard.starr –
I was hesitant to spend the extra money on this carbide blade, but it has been worth every penny.
paul.poljak –
I have been using this carbide oscillating blade for a few months now and it has exceeded my expectations. It cuts through wood and cut through metal on a door footing.
dylan.hutchinson2 –
josegarcor –
really good overall
Dillan Hayward –
The blade I got from Wonderblade works just like in their videos and I’m very impressed!
antoniowilmanruiz –
lewisgordald3 –
Decent blade for the multi tool, works best for cutting hard metal and tough nails.
oscar.cruz3 –
Robert Copeland –
I have had these blades for about 4-5 months, I don’t use them often, however when I need them for cutting out pipes I can’t get into ordinarily with my other tools, it’s always done the job, I do advise others to not think this blade is invincible, it is great and better than any other ones I’ve ever used, there is only so much pressure you can apply on the multitool, so I advise others to still take it easy on the blade just like any other tool that’s worth keeping for a long time.
jesus.morales9 –
Very good blade for the oscillating tool, I have tried Diablo many times over the years, but I have noticed that those wear out faster than the Wonder Blade. This blade is good for not just metal, but with fiber cement board which to my surprise I did not know, no other blade stood the test of time against it. So far I love the blade!
Bill Willington –
Amazing blades, I ordered a few of these and they still hold up well, Ive used these to cut the bottom of door frames, screws and what not and they are very reliable!
harsonhernandezz3 –
My only concern with this blade was that it did not fit on my Bosch starlock tool, but it did with my Ryobi multi tool, nonetheless it works flawlessly against thick 5/16inch bolts and so on. Excellent job Wonderblade!
hanser.benjamin –
I bought a few of these oscillating blades a few months ago for myself and coworkers and they are surprisingly in good condition, we use them in our facility for cutting metal pieces, wood, and aluminum. Great job Wonder Blade!
Kenswickrick –
Xavier Vasquez –
Really wish they had these in stores, they don’t have anything like this and well yes there are other offbrands, I don’t like the others brands customer service or quality, I had a small delay one time and that got resolved quickly by WonderBlade, everything this company has is of great quality and I gets delivered to me fast. Thank you very much for your blades and help!!
utilroofguy345 –
Good blades, wish they come down in price just a little.
tony.barrera –
This blade is a really good blade, I love how they are attenative to details and taking care of their customers, good value and good company.
james.serrano –
WOW! I thought it would be too good to be true when seeing the videos online, but after getting my hands on these multi tool blades, I was astonished how well they cut. They are thick and good quality and just amazing overall!
kenneth.rice –